Видео

I'd suggest that people looking to buy Snaptoggle anchors be careful to avoid fakes. I inadvertently bought fake Snaptoggles on Amazon a few years back.

Can I use the metal wall hangers to mount something that is in front of a duct to a vent? It seems like the metal ones would be the best. But is it wrong to screw anything into the duct through the drywall? It's just leading to a small intake vent. A little screw won't interfere with airflow to me.

40v vs 18v?

Милуоки немного перепиарены,брал у знакомых на пробу инструмент,особого преимущества не заметил,как и расходка( буры,сверла,биты,рулетки)

Полотно одинаковое?

Все зависит от пилки

Так макита больше и тяжелее вот и пилит быстрей

Мощность разная и на маките груз больше , п издо болы!

Пилку нормальную надо

Sad thing is, milwaulkee had the advantage there.

Makita sucks

Limp wristed 80 year old on the Milwaukee

I am going to be removing a section of the OSB that has cat urine and I need to be able to find any ducts, wires, joists or pipes that may be in that area so I don't damage them. Also knowing where those things are will allow you to work more easily so that it does not have to take a day for someone like me who doesn't do construction. I am only willing to do this since it seems easy enough assuming I know what is there and where. My worst nightmare is that it soaked into the joists too but people I spoke to said it probably didn't. I just want to make sure it did not since over time that could rot the wood (as if the odor wasn't bad enough!).

Yeah definitely not a set up im sure that at a makita booth they wouldnt give the makita any advantages 🤔

Having the Milwaukee down on 5 invalidates the test. It's a scam

I love my DCF850. Plenty of power and its compact size is so helpful. Its my go to driver.

Same blade ?

This video is not correct. I I've worked with many pocket doors. Sometimes only the top finishing trim needs to be removed, or other times both the top finishing trim and the top Jam piece on one side only need to be removed. Then you can access the nut on top of the door to lower the door and remove the holding assembly off the latch side of the door. Then pull it halfway out or so and remove the second hanging device. No need to remove any side trims. I could always get them out without removing any side trims. Also you can remove and replace the track without opening up the Hidden Side of the door wall, I've done it many times

Mine is not one side of the track. Rollers are on both sides. This is a helpful video for most but not me...😔

that toggler anchor has a red or yellow push stick that pops it open. I swear by toggler. they exceed their weight. you need to tap it with a hammer making it flush to the wall.

40v Vs 18 volt.. lmao.. that’s like drag racing a mustang gt against a 4 cylinder Camry

Not a real test

superb information...have a great day.

Thank you for this

Where can i find this an do it work on outdoor wood railing

$999AUD is ridiculous better off buying a corded version with a 12v setup in your work ute

Somebody call the wambulance

I bought the DCW200B. I was skeptical but was trying to spare my wife the task of pointing my shop vac at every drywall patch. I was STUNNED at how well it worked as I did the first half-dozen nail holes I’d sanded. There was NO drywall dust in the room, on the floor and even the tool wasn’t dusty. I was a fan. Then things somehow went bad. It stopped collecting drywall dust. It wasn’t blocked (and yes, I’d emptied the bag) but what started as fantastic dust collection was now almost nothing. To add to the fun, the dust escaping the pad was thrown everywhere by the air coming off of the motor/fan. I even tried hooking my shop vac to the sander’s dust collection port. That didn’t help. I’m done with my project now having used the sander with my wife holding the shop vac. I planned to recommend this tool to everyone but as a sander/vacuum - it’s a good sander doing only half of what I’d hoped for. Love DeWalt tools and I own several but this one came up short for me. Please do a couple of rooms sanding spackle and prove me wrong. I’d be delighted to see that.

Makita has double the weights 😂

I’m a year late to the party and I’m really late to the power tool game. I’m 37 and I just learned how to use power tools so I’m embarrassed to say it. I just invested in drills and impact driver and I bought the brushed combo ones at first and I ended up buying the dcf850 cuz my new job I always have to work in tight areas and the DCF850 is a great investment for me. The DCF850 Is my fave in my toolbox.

I generally like makita over anything else it’s just harder to break into that eco system

You video showed the Walabot around 0:09 but you did not show the results. Is there a reason for that ?

Toyota vs Chevy 😂

The slip chuck will not hold my bits. I just got the TID 18 today. I guess I will have to send it back. I didn't see anyway to adjust the collar

30 kg Heavy Mirror hanging off hollow dry wall? what should I use ?

I don't care about the weights. I don't care about the bounce. I care about what those blades look like before. They went on that wood. Why do they never show it? I'll tell you why because it's a fixed test. Don't get me wrong. Both sides do this. It's ridiculous. It's why I hate when they show these things

do you have an affiliate link to the M1? amazon is a joke with actually finding things anymore

the lever on the side is not blade angle. it’s 3 oscillating modes. 1 being the lowest movement and 3rd hash at the top being the highest. makes for much faster cuts. but they are rougher cuts

Póngalo en lo máximo al milvoquin está en 5 llega asta 6

Милуоке не помогло даже то,что на нее давили

holding a button down while standing on a ladder finding ceiling joists of a 12' ceiling sucks.

18v vs 40v?

A percentage of the power is being lost from the tool not sitting properly on the wood. Put a proper man behind that tool and run it again.

My Ryobi does just as good and I bought other tools as well with the remainder 😂

Wonderful video!!!!! I was able to remove our door in under 10 minutes, just in time for our flooring installer to get back to work. Thank you!!!!!

Heartiest congratulations

Thank you

Great video!

Thank you for this video Your a time and a life saver chief thank you

What’s the blade you used?